Chapter Overview
Using the Troubleshooting Tables
Introduction
7–2
2. Adjust the brightness and contrast of your monitor.
If your system is still not working correctly after completing the
previous steps to verify the problem, use the troubleshooting
tables to identify the problem.
If the power-up graphics display appears, followed by the console
prompt (>>>), try starting your operating system.
Use the information in this section to help locate system
problems. The following tables do not identify all possible
problems with the system, nor do the actions suggested remedy
all problems, but they are useful for many common problems.
To use the troubleshooting tables, follow these steps:
1. Find the problem your system is having in the Symptom
column in the following tables.
2. Check the conditions for that symptom in the Possible Cause
column.
3. Follow the advice in the Corrective Action column.