Asic Diagnostic Subtests - Digital Equipment 300 Series AXP Reference Manual

TEST
Example: test Diagnostic testing of the application-specific integrated circuit
asic Command (ASIC) is performed when the system is in console mode. All
reported errors contain a hexadecimal longword of data, and
the FRU code 001 to identify the failing component. Table 4–15
describes each ASIC test and the mode in which it is run.
Table 4–15 ASIC Diagnostic Subtests
Test Name
coreio
fp
init
tci
?
The following is the command format for the ASIC test:
>>> t[est] asic test_name
Result (on error):
?? 001 ASIC xxxxxxxx
4–66
Description
Tests the CORE I/O ASIC
registers
Tests the floating point
registers
Initializes the
TURBOchannel interface
registers and core ASIC
registers
Tests the TURBOchannel
interface registers
Lists subtests
Return
Test
Require-
Mode ments
Console None
Console None
Console None
Console None
Console None
Service