Removing And Installing A Memory Module - Digital Equipment 300 Series AXP Reference Manual

Removing and Installing a Memory Module

Remove To remove or replace a memory module, refer to Figure 2–22 and
Memory perform the following steps:
Step
1
2
Figure 2–22 Removing and Installing a Memory Module
2–36
Action
Be sure all system preparation tasks are complete. Refer
to section entitled Preparing Your System for additional
information.
Remove memory beginning with the module closest to
device position 2. (See Identifying and Locating Options
and Figure 2–10 for the location of device position 2.)
Release the sprint clips
Hold the module by its edges, tilt the module forward,
and pull up and out.
3
2
at both ends of the module.
.
1
MLO-010100