Messages From Other Tests - Digital Equipment 300 Series AXP Reference Manual

Messages from Other Tests

Refer to Chapter 4 for details of the
Tests are run in one of three diagnostic modes, each of which is
either set automatically or by using the console
follows:
•
•
•
The
set diag_section 0
during power-up diagnostic testing.
After power-up is complete, you are automatically switched
to set diag_section 1 .
The
set diag_section 1
customer diagnostic test, entered after power-up tests have
completed and the system is running.
The
set diag_section 2
diagnostic test, which provides more detailed testing. You
may need to connect loopbacks to run some of these tests.
Messages from Other Tests
and commands.
set test
set
command is applied automatically
command initiates the default
command initiates a service
command, as
8–11