Repeat - Digital Equipment 300 Series AXP Reference Manual

REPEAT

Repeats The
Specified Tests execute any specified tests. It is terminated by pressing
or by pressing the Halt button. There are no defaults for this
command.
Format
To execute the
>>> r[epeat] command { qualifier_list },...
Parameters and The command variable specifies the command to be executed.
Qualifiers This can be any valid console command listed in this chapter.
The qualifier_list variable specifies the tests to be repeated, but
is not required, for example:
Examples: The following examples show acceptable command format:
repeat
>>> r test
Command
>>> test scc mouse
>>> r test scc:ni
The next example permits the ASIC (application-specific
integrated circuit) test to be repeated.
>>> r[epeat] t[est] asic
The following example permits the ASIC, memory and SCSI
tests to be repeated.
>>> r[epeat] t[est] asic,mem,scsi
command causes the console program to repeatedly
repeat
command, use the following syntax:
repeat
ASIC
MEM
NVR
SCC
NI
ISDN
Return
REPEAT
Ctrl/C
Return
Return
4–31