The Secure System Jumper - Digital Equipment 300 Series AXP Reference Manual

Locate the Figure 5–1 shows the secure system jumper, labeled W3 on
Secure System the system module. In the enabled position, the jumper is
Jumper attached to pins 1 and 2, counting from left to right. In the
default disabled position, the jumper is attached to pins 2 and 3,
counting from left to right.
Figure 5–1 The Secure System Jumper
Move the To use the password security feature, move the jumper to the
Jumper enabled position, pins 1 and 2, using tweezers or another small
tool.
Invoking the Password Security Feature
Enabled
Disabled
1
2
MLO-010747
5–5