Digital Equipment 300 Series AXP Reference Manual page 46

Preparing Your System
Shut Down
Networked
Systems
Shut Down
Operating
Systems
2–14
Step Action
5 Turn off the monitor and all peripheral devices such as
printers, modems and expansion boxes.
6 Turn off the system unit.
Before you unplug the power cord and open the system
unit, wait about one minute. This allows time for the
power supply capacitors to safely discharge.
7 Remove all cables, loopbacks, terminators and power
cords from the back of the system unit and monitor.
8 Wait a few minutes for the monitor to discharge.
9 Move the monitor away from the system unit (this
requires two people).
10 Remove the system unit cover.
11 Attach the antistatic wrist strap.
Procedures for shutting down your software vary depending on
how your system is networked.
If you are
Networked, or part of a cluster
Not networked, nor part of a cluster
Not sure if you are part of a network
For information on how to shut down your operating system,
refer to your operating system documentation. These manuals
and their order numbers are listed in Appendix D.
Warning
See your
System manager
Software documentation
System manager