Removing The Power Supply - Digital Equipment 300 Series AXP Reference Manual

Removing and Installing the Power Supply
Step
3
4
Figure 2–27 Removing the Power Supply
2–48
Action
Remove the two mounting screws: one located at the
bottom front of the power supply on a metal tab facing
the inside of the system unit; the other located at the
back of the system unit next to the on/off switch. See
Figure 2–27.
Do not confuse the back mounting screw with the back
screw of the power supply cover.
Slide the power supply toward the front of the system
unit, raise the back of the power supply above the back of
the system unit, and slide the power supply out.
Note
MLO-009794