Digital Equipment 300 Series AXP Reference Manual page 107

Table 4–2 (Cont.) Parameters/Qualifiers for the
Parameter/Qualifier
-tc slot_number
[,net]
Description
The TURBOchannel
(-tc)
you wish to boot through. This parameter
tells the boot class driver that it needs
to call the MIPS emulator to execute the
device's boot object. Quotation marks
" " are required when booting from a
TURBOchannel device. For example,
to set the default boot device and then
issue the boot command, enter these
commands:
>>> set bootdef_dev "1/DKA0"
>>> b "1/DK0"
Return
To boot from device DKA400 connected
to TURBOchannel slot 2, enter this
command:
>>> boot "2/dka400"
Return
To perform a MOP boot from a device
connected to TURBOchannel slot 3, enter
this command:
>>>boot "3/esa0" -fi "filename.sys"
To perform a BOOTP boot (tftp) from a
device connected to TURBOchannel slot
4, enter this command:
>>>boot "4/ez0" -fi "/tmp/vmunix"
The user must specify a value for ,net
if the device is a network device. For
example, the following command lines
boot a system from the network device in
TURBOchannel slot 1:
>>> b "1/ES"
Return
(continued on next page)
BOOT
boot Command
slot number
Return
Return
Return
4–9