Digital Equipment 300 Series AXP Reference Manual page 132

SET
Table 4–6 (Cont.) set[env] Command Environment Variables
Environment
Variable
boot_reset
diag_loe
diag_quick
diag_section
4–34
and Values
Variable Description Value
Determines if the On
console will initialize (or use 1)
the system prior
to booting. Digital Off
recommends that (or use 2)
boot_reset be set to
On.
Allows a diagnostic On
to loop on error. All (or use 1)
output is suppressed. Off
To exit the loop, (or use 2)
press the Halt
button to return
to the diagnostic
environment (either
console or service
mode). This feature is
available on loadable
diagnostics only.
It will not work
on TURBOchannel
devices.
Sets the diagnostic On
startup mode to either
(or use 1)
normal or fast startup Off
testing. When fast (or use 2)
mode is selected, not
all diagnostic tests
are executed.
Sets the diagnostic See
environment in which Table 4–8
diagnostics can be
run, either console or
service mode.
Value
Description
Enables system
initialization
before booting.
Disables system
initialization
before booting.
Enables loop on
error feature.
Disables loop on
error feature.
Quick verify
testing only.
Normal (full)
testing occurs.
(continued on next page)