Removing The Turbochannel Filler Plate - Digital Equipment 300 Series AXP Reference Manual

Removing and Installing a TURBOchannel Option (For Models 300/300X/300LX Systems)
Install a
TURBOchannel
Option
2–42
To install a TURBOchannel option, reverse the removal
procedure, and refer to Figure 2–23 as follows:
Step Action
1 Be sure the system preparation tasks are complete. See
the section entitled Preparing Your System for more
information.
2 Remove the screws from the back of the system unit that
hold the filler plate or plates (depending on the width
of the module) in the TURBOchannel slot, as shown in
Figure 2–24. Save the screws to use in step 6. Save
the filler plate or plates in case you remove the option.
Reinsert the filler plate or plates when the option is
removed in order to maintain the EMI and thermal
integrity of the system.
Figure 2–24 Removing the TURBOchannel Filler Plate
MLO-009749