14.4.3.2 Removing the defective TPM
Ê Remove the TPM as described in section
Ê Leave the TPM spacer on the system board when removing the TPM.
14.4.3.3 Installing the new TPM
Ê Install the TPM as described in section
14.4.3.4 Concluding steps
"Installing the system fan holder" on page 75
Ê
"Reassembling" on page 62
Ê
"Connecting the server to the mains" on page 72
Ê
"Switching on the server" on page 73
Ê
"Enabling BitLocker functionality" on page 98
Ê
14.5
Onboard SAS enabling key
14.5.1 Installing the onboard SAS enabling key
Upgrade and Repair Unit
(URU)
Tools: tool-less
14.5.1.1 Preliminary steps
"Disabling BitLocker functionality" on page 77
Ê
"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 48
Ê
"Getting access to the component" on page 49
Ê
TX2540 M1
Upgrade and Maintenance Manual
System board and components
"Removing the TPM" on page
"Installing the TPM" on page
Hardware: 5 minutes
352.
348.
357