Procedure 2: Modifying The Factory Default Management Network Settings; Management Network Definition; Modifying The Usb Key Settings - Polycom RMX 2000 Getting Started Manual

Chapter 2-First Time Installation and Configuration
Procedure 2: Modifying the Factory Default Management
Network Settings
2-8

Management Network Definition

Management Network Definition can be done by two methods:
• USB key (recommended method) – The system is shipped with a
USB key containing the default IP addresses for the control unit and
the shelf management.
These defaults are first modified in the PC and then uploaded to the
RMX.
• Direct connection – Creating a private network between the RMX
and the computer and modifying the management network
parameters using Fast Configuration Wizard in the RMX Web Client.
For more information, see the RMX 2000 Administrator's Guide,
Appendix F: "Configuring Direct Connections to RMX" on page G-1.

Modifying the USB key settings

The USB key contains a text file, lan.cfg, which holds the factory default IP
address parameters. These parameters must be modified to your local
network settings using the LAN Configuration Utility, also on the USB key.
To modify the USB key settings:
1
Plug the USB key into the workstation and double-click
LanConfigUtility.exe to start the utility.
The LAN Configuration Utility dialog box opens.