Procedure 2: Modifying The Factory Default Management Network Settings; Management Network Definition; Modifying The Usb Key Settings - Polycom RMX 2000 Getting Started Manual

Version 1.1

Hide thumbs Also See for RMX 2000:

Table of Contents

Procedure 2: Modifying the Factory Default Management

Network Settings

Management Network Definition can be done by two methods:

•

USB key – The system is shipped with a USB key containing the

default IP addresses for the control unit and the shelf management.

These defaults are first modified in the PC and then uploaded to the

RMX.

•

Direct connection – Creating a private network between the Polycom

RMX 2000 and the computer and modifying the management

network parameters using the Polycom RMX 2000 Web Client.

For more information about the direct connection method, see RMX 2000

Administrators's Guide, Appendix F: "Configuring Direct Connections to

RMX" on page F-1.

The USB key contains a text file, lan.cfg, which holds the factory default IP

address parameters. These parameters must be modified to your local

network settings.

To modify the USB key settings:

Plug the USB key into the PC.

Use a text editor program (WordPad, Notepad, etc.) to Open lan.cfg.

Polycom RMX 2000 Getting Started Guide

2-7

Table of Contents