Mazda RX-8 Workshop Manual page 1808

< Previous Next >
2011 - RX-8 - Brakes
FRONT ABS WHEEL-SPEED SENSOR INSPECTION
Installation Visual Inspection
1. Inspect the following items:
If there is any malfunction, replace the applicable part.
a. Excessive play of the front ABS wheel-speed sensor
b. Deformation of the front ABS wheel-speed sensor
Clearance inspection
1. Remove the front ABS wheel-speed sensor.
2. Measure the distance between the front ABS wheel-speed sensor installation surface and the
front ABS sensor rotor. This is dimension A.
3. Calculate the clearance between the front ABS wheel-speed sensor and the front ABS sensor