Communication Test Using Serial Interface Program - Ametek ASTDC60D1C-E00 Programming Manual

Asterion DC Series Programming

Communication test using serial interface program

5.2.2
1. Use one of the available programs for serial communication, such as Tera
Term.
If you choose to use Tera Term:
2. Select serial option in the Tera Term window and select the port identified in
the device manager and press OK. .(Refer to Figure 5- 3)
3. Select setup and select serial port in the setup window.
4. Set the baud rate to 115200, 8 data bits, no parity, 1 stop bit, and none flow
control.
M330461-01 Rev A
Figure 5- 3 Port identification in Tera Term
Figure 5- 4 Baud rate selection in Tera Term
Ethernet Configuration and Remote Programming
5-3