Figure 4-3. Rs232 Communications Cable Pinout; Figure 4-4. Rs232 Screen (Configure) - Ametek ASTDC60D1C-E00 Programming Manual

RS232 Configuration and Remote Programming
2. Connect power to the unit and turn on the unit.
3. The baud rate is selectable through the front panel, see Figure 4-4. Change the
baud rate for RS232 to 9600.
To navigate to RS232, configure screen, go to Home  Control Interface  RS232
 RS232 Configure.
4. Upon tapping the text box, following baud rates selection screen will appear.
4-4
TxD-Transmit
RxD-Receive
RTS-Request to Send
CTS-Clear to Send

Figure 4-3. RS232 Communications Cable Pinout

Figure 4-4. RS232 Screen (Configure)

Asterion DC Series Programming
M330461-01 Rev A