Connecting Cable Holders - Extreme Networks BlackDiamond 10808 Hardware Installation Manual

Figure 49: BlackDiamond Cable Holders and Clips
Interlocking
cable holder
and cable clips

Connecting Cable Holders

Each cable holder holds up to 12 separate cables, with 6 on each side. Connect cable holders end to end
as needed to accommodate the number of cables you need to organize.
To connect the cable holders:
1 Hold two cable holders as shown in
Make sure that one locking tab at the joint is on top and the other is on the bottom.
Figure 50: Connecting Cable Holders
BlackDiamond 10808 Switch Hardware Installation Guide
Cable
clips
Cable
holder
Side view
ENIN005A
Figure 50.
Using the Cable Holders and Cable Clips
ENIN003
101