Technical Information - InfoPrint 4247 Manual

• Getting Started
• Understanding the Operator Panel
• Printer Configuration Menus
• Setting Up Different Forms Paths
• Problem Solving
• Printer and Form Specifications

Technical information

Specified operating environment
Physical specifications
• Dimensions in base configuration:
– Width: 720.0 mm (28.3 in)
– Depth: 400.0 mm (15.8 in)
– Height: 350.0 mm (13.8 in)
– Weight: 33.0 kg (72.6 lbs)
• Cabinet Printer Stand, black (#4472, 4473)
– Top surface width: 726 mm (28.6 in)
– Top surface depth: 411 mm (16.2 in)
– Top surface height: 775 mm (30.5 in)
– Weight: 44.5 kg (98.1 lb)
– Footprint with Output Tray attached: 726 mm (W) x 792 mm (D) or 28.6 in wide x 31.2 in
deep
• Open printer stand (#4470, 4471) dimensions are:
– Top surface width: 28.5 in (724 mm)
– Top surface depth: 16 in (406 mm)
– Top surface height: 28 in (711 mm)
– Weight: 63 lb (28.6 Kg)
– Footprint with output tray attached: 28.5 in (72.4 cm) x 32 in (81.3 cm)
Operating environment
Paper handling:
• Continuous forms
The 4247-Z03 will handle up to 8-part continuous forms in either front paper path.
For the tractor paths:
– Form weight can range from 56 grams per square meter (gsm) (15 lb) to 150 gsm (40 lb).
Paper weights outside this range must be tested by the customer for proper operation.
– Overall (total) form thickness for all parts may range from 0.08 mm (0.003 in) to 0.64 mm
(0.025 in).
The following forms widths and lengths are supported:
– Form width from 76.2 mm (3 in) to 431.8 mm (17 in)
– Form lengths from 76.2 mm (3 in) to 609.6 mm (24 in)
Forms less than 152.4 mm (6 in) in length or width should be tested for satisfactory stacking
and may require operator assistance.
InfoPrint Solutions Company Asia Pacific
Hardware Announcement AG08-0532
InfoPrint is a registered trademark of Ricoh Co., Ltd. 11