Rep 8.2 Mea Unit - Duplex Assembly; Rep 8.3 Transfer Roller Assembly - Xerox WorkCentre M20 Service Manual

REP 8.2 MEA Unit - Duplex Assembly

Parts List on PL 8.10 and PL 8.11
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA HOU - side cover assembly, REP 8.1.
2. Remove the MEA unit - duplex assembly, Figure 1.
1
Unclip the MEA unit - duplex
assembly from the front and
rear.
Figure 1 MEA unit - duplex assembly removal
Replacement
Replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 8.2, REP 8.3

REP 8.3 Transfer Roller Assembly

Parts List on PL 8.11
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1.
NOTE: For clarity, the MEA unit - duplex assembly is shown removed from the machine in Fig-
ure 1.
2
2.
Remove the MEA unit - duplex
assembly.
Replacement
Replacement is the reverse of the removal procedure.
March 2004
4-24
WARNING
WARNING
CAUTION
Open the ELA HOU - side cover assembly.
Remove the transfer roller assembly, Figure 1.
1
Unclip the front and rear bush
holders.
Figure 1 Transfer roller assembly removal
2
Remove the transfer roller
assembly.
Work Centre M20 Family