Reboot; Save; Show - Avaya 2330 Reference Manual

reboot

Use this command to reboot the AG2330 using the current boot parameters.
Syntax
reboot
Example
AG# reboot

save

Use this command to save the current configuration to a .cfg file on the flash. Save your
configuration to flash each time you make configuration changes to allow the system to boot
from the latest configuration upon subsequent reboot.
You can also use this command to save the configuration to a network location using TFTP,
providing a backup of your configuration, or to copy the configuration to another AG2330.
Syntax
save {local [<filename>] | network <IP address> <file path>}
Table 7: Variable definitions
Variable
local [<filename>]
network <IP address> <file path>
Example
AG# save local

show

Use this command to access the show commands.
Command Line Reference
Value
Specifies to save the configuration file to the
local flash. You can also specify an optional
filename. The default filename is
system.cfg.
Specifies the network IP address, path, and
file name for the saved file.
reboot
August 2013 35