Table of Contents
Advertisement
You can set two or three subnets.
5. If you want to create new subnets for availability zones, select the Create subnets
check box.
Do not select Create subnets if you are planning to use existing subnets.
6. If you are planning to use the existing subnets, do not select Create subnets.
7. Click Generate template.
8. Save the file to your computer.
Next steps
Deploy the CloudFormation stack:
• For a single-node system, see
• For a multi-node system, see
Deploying a single-node CloudFormation stack
About this task
Use this procedure to deploy a standalone instance by using a single-node CloudFormation
template.
Before you begin
• Use standard Amazon Web Services procedures to create the required network setup,
including Virtual Private Cloud (VPC) settings and Security Groups.
• Generate a single-node CloudFormation template.
• Ensure that you have network access to the Amazon VPC before deploying an AMI.
Procedure
1. Sign in to the AWS console and navigate to Services > Management Tools >
CloudFormation.
CloudFormation is an AWS service used to create a stack. A stack is a graph of objects
such as EC2 instances and EBS volumes inside the Amazon cloud. CloudFormation is
used to create the objects required for a single-node Avaya Aura
within a subnet of an existing virtual network.
2. On the CloudFormation page, click Create Stack.
3. On the Create Stack page, click Select Template.
4. On the Select Template page, in the Choose a template area, click Choose file.
5. Select the single-node yaml CloudFormation template file that you generated.
6. Click Next.
7. On the Specify Details page, in the Stack name field, type the stack name.
The host name for the node is derived from the stack name.
October 2018
Deploying a single-node CloudFormation stack
Deploying a multi-node CloudFormation stack
Deploying the Avaya Aura
Comments on this document? infodev@avaya.com
Amazon Web Services deployments
®
Web Gateway system
®
Web Gateway
on page 53.
on page 57.
53
Advertisement
Table of Contents
