Check Customer Options; Check Link Status; Power Up Definity Audix System; Resolve Alarms - Avaya CMC1 Installation, Upgrades And Additions

Check Customer Options

To check customer options:
1. Type display system-parameters customer-options and press Enter.
2. Ensure that the G3 version: field is V11.
3. If the customer was using Supplementary Services Protocol b or d on an ISDN-PRI trunk
group before the upgrade, go to screen 7, QSIG Optional Features, and ensure that the
Basic Call Setup field is y.

Check Link Status

To check link status:
1. Type display communication-interface links and press Enter.
2. Type status link number and press Enter. Repeat this step for each link.
3. Check that DS1 trunks and BRI phones are functioning normally.
4. Refer to Maintenance for Avaya DEFINITY Server CSI to test or restore the out-of-service
links.

Power Up DEFINITY AUDIX System

To power up the AUDIX assembly, refer to

Resolve Alarms

Type display alarms and press Enter to examine the alarm log. Resolve any alarms using
Maintenance for Avaya DEFINITY Server CSI.

Restore Announcements (if necessary)

Type restore announcements and press Enter to copy announcements from the upgraded
translation flashcard to memory, which takes about 40 minutes.
DEFINITY AUDIX Power Procedures
Task Table
on page 203.
Issue 10 June 2005 201