Reports - NEC NEFAX655e Manual

Reports

Reports
Transmit Message Confirmation
Manual TX Report
3 - 15
Many of the available reports can be programmed to print automatically. If you
wish to have these set up, contact your Key Operator to set these up or refer to the
Chapter 4 Facsimile Programming.
If TX Message Confirmation Report is turned ON, this unit automatically prints a
Confirmation Report. If it is turned OFF, you can still check transmission results
by printing the Activity Report or pressing the Journal key to view the Journal on
the LCD.
If the transmission is successful, the unit prints a report with the date and time, the
receiver number, the number of pages that were sent, and other useful
information.
If the document was scanned into memory, the report prints a copy of the first
page of the transmission on the report for your reference.
If the transmission was not completed, the unit prints out an error report.
This function can be used to save paper and bulk in your files by printing the TX
Results on the back of the original.
1
When the document has finished sending,
place it face up in the By-Pass Feed Tray.
2
Press the Journal key.
3
If you are doing this immediately after
sending the document, press START.
4
If there has been other sessions since your transmission, use the Arrow
keys to scroll through the list and locate the telephone number you sent to
and press START.
Advanced Facsimile