Table of Contents
Advertisement
ht-ssid-profile
local-probe-req-thresh
max-clients
max-retries
max-tx-fail
mcast-rate-opt
no
opmode
bSec-128
dynamic-wep
opensystem
static-wep
wpa-aes
wpa2-aes-gcm-128
wpa2-aes-gcm-256
wpa-psk-aes
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
frames. Note that hiding the SSID does very little to
increase security.
Name of high-throughput SSID profile to use for
configuring high-throughput support. See
ssid-profile" on page
1494.
APs will not respond to client probe requests if the
SNR value in the probe request is less than the
specified threshold value.
Maximum number of wireless clients for the AP.
Maximum number of retries allowed for the AP to send
a frame.
The AP assumes the client has left and should be
deauthorized when the AP detects this number of
consecutive frames were not delivered because the
max-retries threshold was exceeded.
Enables or disables scanning of all active stations
currently associated to an AP to select the lowest
transmission rate for broadcast and multicast frames.
This option only applies to broadcast and multicast
data frames; 802.11 management frames are
transmitted at the lowest configured rate.
NOTE: Do not enable this parameter unless instructed
to do so by your Dell technical support representative.
Negates any configured parameter.
The layer-2 authentication and encryption to be used
on this ESSID to protect access and ensure the privacy
of the data transmitted to and from the network.
WPA2 with AES GCM-128 encryption and dynamic keys
using 802.1X
WEP with dynamic keys.
No authentication and encryption.
WEP with static keys.
WPA with AES encryption and dynamic keys using
802.1x.
WPA2 with AES GCM-128 (Suite-b) encryption and
dynamic keys
using 802.1X. This parameter requires the ACR license.
WPA2 with AES GCM-256 (Suite-b) encryption and
dynamic keys
using 802.1X. This parameter requires the ACR license.
WPA with AES encryption using a preshared key.
Range
—
"wlan ht-
0-100
0-256
0-15
0 -2,147,
483,647
—
—
—
—
—
—
—
—
—
—
—
Default
"default"
0
64
4
0
disabled
—
opensystem
—
—
—
—
—
—
—
—
wlan ssid-profile | 1503
Advertisement
Table of Contents
