Dell PowerConnect W-7200 Series Reference Manual page 1451

voice rtcp-inactivity
voice rtcp-inactivity {enable | disable}
Description
This command enables or diables the RTCP inactivity timer.
Syntax
Parameter
enable
disable
Usage Guidelines
You can enable the
Example
The following command enables the
(host) (config) #voice rtcp-inactivity enable
Command History
Version
ArubaOS 5.0
ArubaOS 6.0
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Enables the RTCP inactivity timer.
Disables the RTCP inactivity timer.
timer to clear a voip session if an on-hold client moves out of the coverage area.
RTCP inactivity
RTCP inactivity
Description
The rtcp-inactivity parameter was introduced to the voip command.
This was part of the voip command in the earlier version. voip command is now
deprecated.
Licensing
This command requires the PEFNG
license
timer:
Command Mode
Config mode on master controller
voice rtcp-inactivity | 1451