Dell PowerConnect W-7200 Series Reference Manual page 1528

wms client
wms client <macaddr> mode {manually-contain|interfering|valid}
Description
This command allows you to classify a wireless client into one of several categories.
Syntax
Parameter
client
mode
manually-contain
interfering
valid
Usage Guidelines
ArubaOS can automatically determine client classification based on client behavior, but this command allows you to
explicitly classify a client. The classification of a client is used in certain policy enforcement features. For example, if
protect-valid-sta is enabled in the IDS Unauthorized Device Profile, then clients that are classified as valid cannot
connect to non-valid APs.
Example
The following command classifies a client as valid:
(host) #wms client 00:00:A4:34:C9:B3 mode valid
Command History
Release
ArubaOS 3.0
ArubaOS 6.1
Command Information
Platforms
All platforms
1528 | wms client
Description
MAC address of the client.
Classify the client into one of the following categories:
Manualy enable denial of service to this client.
Setting the client mode to interfering makes it part of clients outside the enterprise
A client that is part of the enterprise.
Modification
Command introduced
The following parameters were deprecated
dos
neighbor
The following parameters were introduced:
manually-contain
interfering
Licensing
Base operating system
Command Mode
Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide