Dell PowerConnect W-7200 Series Reference Manual page 1447

voice dialplan-profile
voice dialplan-profile <profile>
clone <source>
dialplan {<sequence> <pattern> <action>}
no...
Description
This command allows you to create a dial plan profile and configure dial plans to the profile.
Syntax
Parameter
<profile>
clone
dialplan
<sequence>
<pattern>
<action>
Usage Guidelines
You can configure dial plans on the controller that are required by the local EPABX system to provide outgoing
PSTN call facility from a SIP device.
NOTE: Dial plan can be configured only for SIP over UDP.
Example
The following command creates a dial plan for the dial plan profile, local :
(host) (config) #voice dialplan-profile local
(host) (Dialplan Profile "local") #dialplan
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of this instance of the dial plan profile.
Name of the existing dial plan profile from which parameter values are copied.
Configures a dialplan with the sequence, pattern, and action specified for the profile. You can
configure upto 20 dialplans for a profile.
A number that positions the dial plan in the list of dial plans configured in the controller. The
range is 100 - 65535.
A digit pattern or the number of digits that will be dialed by the user. You can specify the digit
pattern using 'X', 'Z', 'N', '[ ]' and '.'.
X is a wild card that represents any character from 0 to 9.
l
Z is a wild card that represents any character from 1 to 9.
l
N is a wild card that represents any character from 2 to 9.
l
[ ] is a wild card that represents the number or the range specified in the brackets.
l
. (period) is a wild card that represents any-length digit strings.
l
A prefix code that is automatically prefixed to the dialed number. This is specified as <prefix-
code>%e. Examples of dial plans are:
9%e: The number 9 is prefixed to the dialed number.
l
91%e: The number 91 is prefixed to the dialed number.
l
300 Z. 91%e
voice dialplan-profile | 1447