Dell PowerConnect W-7200 Series Reference Manual page 1507

opmode wpa2-aes
Command History
Release
ArubaOS 3.0
ArubaOS 3.2
ArubaOS 3.3
ArubaOS 3.3.1
ArubaOS 3.4
ArubaOS 3.4.1
ArubaOS 6.1
ArubaOS 6.1.4.1
ArubaOS 6.2
Command Information
Platforms
All platforms, except for the
noted opmode parameters.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Modification
Command introduced
The wmm-ts-min-inact-int parameter was introduced. The wpa2-preauth parameter was
removed,
Support for the high-throughput IEEE 802.11n standard was introduced including the ht-
ssid-profile parameter and various rate changes.
Support for configurable WMM AC mapping was introduced including the wmm-be-
dscp, wmm-bk-dscp, wmm-vi-dscp, and wmm-vo-dscp parameters.
The deny-bcast and disable-probe-retry parameters were introduced. The drop-mcast
parameter was deprecated.
License requirements changed in ArubaOS 3.4.1, so the command required the PEF
license instead of the Voice Services Module license required in earlier versions.
The opmode options wpa2-aes-gcm-128 and wpa2-aes-gcm-256 were introduced. These
parameters require the ACR license.
The qbss-load-enable option is included.
The advertise-ap-name parameter was added.
The advertise-location and enforce-user-vlan parameters were added.
Licensing
Base operating system, except for
the noted parameters
Command Mode
Config mode on master controllers
wlan ssid-profile | 1507