Dell PowerConnect W-7200 Series Reference Manual page 1473

whitelist-db cpsec-local-switch-list
whitelist-db cpsec-local-switch-list
del mac-address <mac-address>
purge
Description
Delete a local controller from the local switch whitelist.
Syntax
Parameter
del mac-address <mac-address>
purge
Usage Guidelines
If your deployment includes both master and local controllers, then the campus AP whitelist on each controller
contains an entry for every AP on the network, regardless of the controller to which it is connected. The master
controller also maintains a whitelist of local controllers with APs using control plane security. When you change a
campus AP whitelist on any controller, that controller contacts the master controller to check the local switch
whitelist, then contacts every other controller on the local switch whitelist to notify it of the change.
If you ever remove a local controller from the network, you must also remove the local controller from the local
switch whitelist. If the local switch whitelist contains entries for local controllers no longer on the network, then a
campus AP whitelist entry can be marked for deletion but will not be physically deleted, as the controller will be
waiting for an acknowledgement from another controller no longer on the network. Any unused local controller entries
in the local switch whitelist can significantly increase network traffic and reduce controller memory resources.
Example
The following command removes a local controller from the local switch whitelist:
(host) (config) #whitelist-db cpsec-local-switch-list del mac-address 00:1E:33:CA:D2:51
Related Commands
Command
show whitelist-db cpsec-local-switch-
list
Command History
Version
ArubaOS 5.0
ArubaOS 6.0
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Remove a single controller from the local switch whitelist.
Clear all entries from the local switch whitelist
Description
Show the local switch whitelist for the control plane feature.
Modification
Command introduced
The cpsec-local-ctlr-list parameter was modified to cpsec-local-switch-list
Mode
Enable mode
whitelist-db cpsec-local-switch-list | 1473