Dell PowerConnect W-7200 Series Reference Manual page 1445

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

vlan
vlan <id> [<description>] |[<name> <vlan-ids>]|[range <range>]|[wired aaa-profile <profile>]
Description
This command creates a VLAN ID or a range of VLAN IDs on the controller.
Syntax
Parameter
<id>
<description>
<name>
<vlan-ids>
range <range>
wired aaa-profile
<profile>
Usage Guidelines
Use the
interface vlan
command to create a named VLAN to set up a VLAN pool. A VLAN pool consists of a set of VLAN IDs which are
grouped together to efficiently manage multi-controller networks from a single location.
To enable role-based access for wired clients connected to an untrusted VLAN and/or port on the controller, you
must use the wired aaa-profile parameter to specify the wired AAA profile you would like to apply to that VLAN. If
you do not specify a per-VLAN wired AAA profile, traffic from clients connected to an untrusted wired port or
VLAN will use the global wired AAA profile, if configured.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Identification number for the VLAN.
Description of a VLAN ID.
(Optional) Identification name of the VLAN. The
VLAN name was created using the vlan-name
command.
(Optional) List of VLAN IDs that are associated
with this VLAN. If two or more IDs are listed, the
VLAN needs to specified first as a VLAN pool
using the vlan-name command.
Create a range of multiple VLAN IDs by
specifying the beginning and ending VLAN ID
separated by a hyphen.
For example, 55-58
Assign an AAA profile to a VLAN to enable role-
based access for wired clients connected to an
untrusted VLAN or port on the controller. This
parameter applies to wired clients only.
Note that this profile will only take effect if the
VLAN and/or the port on the controller is
untrusted. If both the port and the VLAN are
trusted, no AAA profile is assigned.
command to configure the VLAN interface, including an IP address. Use the
Range
Default
2-4094
1
1-32
VLAN000x,
characters;
where x is
cannot begin
the ID
with a
number.
numeric
character
1-32
VLAN<id>
characters; a
name cannot
begin with a
numeric
character
Existing VLAN
1
IDs
2-4094
vlan-name
vlan | 1445

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents