Dell PowerConnect W-7200 Series Reference Manual page 1438

user-role
user-role <name>
access-list {eth|mac|session} <acl> [ap-group <group>] [position <number>]
bw-contract <name> [per-user] {downstream|upstream}
captive-portal <profile>
dialer <name>
max-sessions <number>
no ...
pool {l2tp|pptp} <name>
reauthentication-interval <minutes>
session-acl <string> [ap-group <group>] [position <number>]a
stateful-ntlm <ntlm_profile_name>
vlan {VLAN ID|VLAN name}
wispr <wispr_profile_name>
Description
This command configures a user role.
Syntax
Parameter
<name>
access-list
<acl>
ap-group
position
bandwidth-con
tract
downstream
per-user
upstream
captive-portal
1438 | user-role
Description
Name of the user role.
Type of access control list (ACL) to be applied:
eth: Ethertype ACL, configured with the ip access-list eth command.
mac: MAC ACL, configured with the ip access-list mac command.
session: Session ACL, configured with the ip access-list session
command.
Name of the configured ACL.
(Optional) AP group to which this ACL applies.
(Optional) Position of this ACL relative to other ACLs that you can
configure for the user role. 1 is the top.
Name of a bandwidth contract or rate limiting policy configured with
the aaa bandwidth-contract command. The bandwidth contract must
be applied to either downstream or upstream traffic.
Applies the bandwidth contract to traffic from the controller to the
client.
Specifies that bandwidth contract is assigned on a per-user basis
instead of a per-role basis. For example, if two users are active on the
network and both are part of the same role with a 500 Kbps bandwidth
contract, then each user is able to use up to 500 Kbps.
Applies the bandwidth contract to traffic from the client to the
controller.
Name of the captive portal profile configured with the aaa
authentication captive-portal command.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Range Default
— —
— —
— —
— (last)
— —
— —
— (per
role)
— —
— —