Dell PowerConnect B-RX Configuration Manual page 201

TABLE 41
This field...
(leading character)
address
ref clock
st
when
poll
delay
disp
To display information about SNTP status, enter the following command.
BigIron RX# show sntp status
Clock is synchronized, stratum = 2, reference clock = 207.95.6.102
precision is 2**-16
reference time is 3472592840.0
clock offset is 225.21829605 msec, root delay is 0.000 msec
root dispersion is 0.000 msec, peer dispersion is 0.000 msec
round trip delay is 450.43659210 msec
sntp poll-interval is 1800 secs
Syntax: show sntp status
The following table describes the information displayed by the show sntp status command.
TABLE 42
This field...
unsynchronized
synchronized
stratum
reference clock
precision
reference time
clock offset
root delay
root dispersion
peer dispersion
BigIron RX Series Configuration Guide
53-1002253-01
Specifying a Simple Network Time Protocol (SNTP) server
Output from the show sntp associations command
Displays...
One or both of the following:
*
~
IP address of the peer
IP address of the peer's reference clock
NTP stratum level of the peer
Amount of time since the last NTP packet was received from the peer
Poll interval in seconds
Round trip delay in milliseconds
Dispersion in seconds
Output from the show sntp status command
Indicates...
System is not synchronized to an NTP peer.
System is synchronized to an NTP peer.
NTP stratum level of this system
IP Address of the peer (if any) to which the unit is synchronized
Precision of this system's clock (in Hz)
Reference time stamp
Offset of clock to synchronized peer
Total delay along the path to the root clock
Dispersion of the root path
Dispersion of the synchronized peer
Synchronized to this peer
Peer is statically configured
5
125