Displaying The Contents Of A File - Dell PowerConnect B-RX Configuration Manual

3
Flash memory and PCMCIA flash card file management commands
BigIron RX# dir /slot2/
Directory of /slot2/
08/01/2003 18:25:28
08/01/2003 18:28:06
08/01/2003 18:28:24
08/01/2003 18:28:30
08/01/2003 18:28:01
08/01/2003 18:28:03
08/01/2003 18:29:04
08/01/2003 18:29:12
08/01/2003 18:32:03
08/01/2003 18:32:08
08/01/2003 18:32:11
08/01/2003 18:32:14
08/01/2003 18:32:17
The following information is displayed for each file.
TABLE 33
This field...
File date
Time of day
File size
Read-write attribute
File name
Long file name
The directory also lists the total number of files that match the parameters you specified, the total
number of bytes used by all the files, and the number of bytes still free.

Displaying the contents of a file

You can display the contents of a file in the management module's flash memory or on a flash card
inserted in the management module's slot 1 or slot 2.
The software attempts to display the specified file in the file system that has the current
management focus. By default, flash memory has the management focus. However, you do not
need to change the focus to display the file in a file system that does not currently have
management focus. In this case, you can specify the /<directory>/ <path-name> parameter with
the more command to display the file in the desired file system.
44
<DIR>
12 File(s)
1 Dir(s) 114,577,408 bytes free
CLI display of directory information
Displays...
The date on which the file was placed in the flash memory or card, if the
Brocade device's system clock is set.
The time of day at which the file was placed in the flash memory or card, if the
Brocade device's system clock is set.
The number of bytes in the file.
If you have set the file's read-write attribute to read-only, "R" appears before
the file name. If the file's read-write attribute is read-write (the default), no
value appears in this column. For information, refer to
attribute of a file"
The file name.
This field applies to files on a flash card only.
The longer file name if the file was created on a PC and the name is longer
than the 8.3 format.
3,092,508 PRIMARY
3,092,508 primary.1234
389,696 MONITOR
389,696 MONITOR1
389,696 MONITOR2
389,696 MONITOR3
389,696 MONITOR4
DIR1
389,696 1234567890.12345
389,696 123456.123
389,696 123456.123
389,696 123456.123
389,696 123456.123
10,081,976 bytes
on page 48.
"Changing the read-write
BigIron RX Series Configuration Guide
53-1002253-01