Show Copper-Ports Cable-Length; Show Fiber-Ports Optical-Transceiver - Planet WGSD-1022 User Manual

5.14.3 show copper-ports cable-length

The show copper-ports cable-length privileged EXEC command displays the estimated copper cable length attached to a
port.
Syntax
show copper-ports cable-length [interface]
interface — A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This feature works only on 1-Gbps ports.
Example
The following example displays the estimated copper cable length attached to all ports.
Console# show copper-ports cable-length
Port Length [meters]
------ ---------------------
e1 < 50
e2 Giga link not active
e3 110-140
e4 Fiber

5.14.4 show fiber-ports optical-transceiver

The show fiber-ports optical-transceiver privileged EXEC command displays the optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [interface] [detailed]
interface — A valid Ethernet port.
Detailed — Detailed diagnostics.
User's Manual of WGSD-1022/WGSD-8000
- 249 –