Show Interface Ethernet - Planet WGSW-24000 User Manual

24-port 10/100/1000mbps ethernet security switch
Hide thumbs Also See for WGSW-24000:
Table of Contents

Advertisement

interface.
Transmit Packets Errors
because of errors.
Collisions Frames
segment.
Time Since Counters Last Cleared
since the statistics for this port were last cleared.
The display parameters when the argument is 'switchport' are as follows:
Packets Received Without Error The total number of packets (including broadcast packets and
multicast packets) received by the processor.
Broadcast Packets Received
broadcast address. Note that this does not include multicast packets.
Packets Received With Error
preventing them from being deliverable to a higher-layer protocol.
Packets Transmitted Without Error
interface.
Broadcast Packets Transmitted
requested to be transmitted to the Broadcast address, including those that were discarded or not
sent.
Transmit Packet Errors
because of errors.
Address Entries Currently In Use The total number of Forwarding Database Address Table
entries now active on the switch, including learned and static entries.
VLAN Entries Currently In Use
table.
Time Since Counters Last Cleared
since the statistics for this switch were last cleared.

8.1.5 show interface ethernet

This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
show interface ethernet {<slot/port> | switchport}
Format
Privileged EXEC
Mode
The display parameters when the argument is ' <slot/port>' is as follows:
Packets Received
Octets Received - The total number of octets of data (including those in bad packets) received on
the network (excluding framing bits but including FCS octets). This object can be used as a
reasonable estimate of ethernet utilization. If greater precision is desired, the etherStatsPkts and
The number of outbound packets that could not be transmitted
The best estimate of the total number of collisions on this Ethernet
The elapsed time, in days, hours, minutes, and seconds
The total number of packets received that were directed to the
The number of inbound packets that contained errors
The total number of packets transmitted out of the
The total number of packets that higher-level protocols
The number of outbound packets that could not be transmitted
The number of VLAN entries presently occupying the VLAN
The elapsed time, in days, hours, minutes, and seconds

Advertisement

Table of Contents
loading

Table of Contents