Time Settings; System Time - Planet WGS-4215 Series User Manual

4.2.5 Time Settings

4.2.5.1 System Time

Configure SNTP on this page. SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing
the clocks of computer systems. You can specify SNTP Servers and set GMT Time zone. The SNTP Configuration screens in
Figure 4-2-8 & Figure 4-2-9
The page includes the following fields:
Object
• Enable SNTP
• Manual Time
• Time Zone
appear.
Figure 4-2-8 SNTP Setup Page Screenshot
Description
Enabled: Enable SNTP mode operation.
When enabling SNTP mode operation, the agent forwards and transfers
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
To set time manually.
• Year - Select the starting Year.
• Month - Select the starting month.
• Day - Select the starting day.
• Hours - Select the starting hour.
• Minutes - Select the starting minute.
• Seconds - Select the starting seconds.
Allows to select the time zone according to the current location of switch.
User's Manual of WGS Managed Series
74