Configuring Device Paths For This Host; Configuring, Unconfiguring, And Inversing The Configuration Of; All Device Paths - Qlogic SANsurfer FC HBA Manager Application User Manual

7 – Setting Up Connections
Configuring Fibre Channel Devices
7.4.1

Configuring Device Paths for this Host

You can configure device paths for a host as visible, hidden, or unconfigured. Use
the following options as appropriate:
Configuring, unconfiguring, and inversing the configuration of all device paths
■
(see section 7.4.1.1)
Configuring individual device paths
■
NOTE:
7.4.1.1
Configuring, Unconfiguring, and Inversing the Configuration of All
Device Paths
Perform the following steps to configure, unconfigure, or inverse the configuration
of all device paths.
1. From the Fibre Channel Port Configuration dialog box Device menu, click
Configure to configure the device paths on this host.
2. Select one of the following:
❑
❑
❑
7-30
There must be one visible path for the operating system to see a device.
Select Configure All to configure all unconfigured device paths.
Select unConfigure All to unconfigure all configured device paths.
Select Inverse State to set configured device paths as unconfigured and
unconfigured device paths as configured.
(see section 7.4.1.2)
Q
FS0054603-00 C