Setting The Event Log Options; Options Dialog Box—Event Log Section - Qlogic SANsurfer FC HBA Manager Application User Manual

6 – Getting Started

Setting the Event Log Options

6.9
Setting the Event Log Options
Perform the following steps to set the number of events the event log can list and
the logging of informational and warning events.
NOTE:
1. Do one of the following:
❑
❑
❑
The Options dialog box displays
Figure 6-9. Options Dialog Box—Event Log Section
2. In the Event Log section Log Size box, type the number of events the event
log can list. The range is 20 to 200 events. The default is 20 events.
3. If you want to enable logging of informational events, select the Event Log
section Log Informational Events check box.
4. If you want to enable logging of warning events, select the Event Log section
Log Warning Events check box.
5. Click OK to return to the SANsurfer FC HBA Manager main window.
6-14
See section 8.1 for information about viewing the event log.
On the SANsurfer FC HBA Manager main window Settings menu, select
Options.
Right-click the HBA tree. From the pop-up menu, click Options.
Press CTRL+SHIFT+O.
(see figure 6-9).
Q
FS0054603-00 C