11 – Updating the HBA
Saving NVRAM, Flash BIOS, and FCode
11.5
Saving NVRAM, Flash BIOS, and FCode
NOTE:
Perform the following steps to save the current NVRAM, Flash BIOS, or FCode to
a file.
1. In the SANsurfer FC HBA Manager main window HBA tree, select the HBA port.
NOTE:
2. Click the Utilities tab. The Utilities tabbed page displays
Figure 11-11. Utilities Tabbed Page (Save NVRAM, Flash BIOS, and FCode)
In Solaris SPARC, the Save Flash button is replaced by the Save FCode
button.
11-20
Saving NVRAM and flash BIOS are not available on a NetWare system
(the Save NVRAM and Save FLASH buttons appear dimmed on the
Utilities tabbed page).
You cannot save the NVRAM, flash BIOS, or FCode for multiple
HBAs.
Q
(see figure
11-11).
FS0054603-00 C