Qlogic SANsurfer FC HBA Manager Application User Manual page 134

8 – Monitoring the Connections
Viewing and Managing the Alarm Log
2. If the email notification was sent with the host configuration, there will be an
attached .qlc file. Do the following:
a. Download the .qlc file.
b. Open the .qlc file. This is a virtual host configuration file, and the procedures
c. View and display the information (including the alarm log) as you would from
d. When finished, disconnect from the virtual host
8-14
are the same as viewing a saved virtual host configuration from a file
section 7.11.2). Note the following:
If not already started, start the SANsurfer FC HBA Manager.
❑
On the Host menu, click Load from File to load the file.
❑
any virtual host configuration file.
details).
Q
(see section 7.1.5 for
FS0054603-00 C
(see