Qlogic SANsurfer FC HBA Manager Application User Manual page 192

12 – Troubleshooting
Troubleshooting Problems and Solutions
Table 12-1. Troubleshooting Problems and Solutions (Continued)
Installation does not
copy files
Installation reports that
there is no space
available
Unable to start the
SANsurfer FC HBA
Manager GUI using the
desktop shortcut
(SANsurfer icon)
SANsurfer FC HBA
Manager GUI starts
then hangs indefinitely
12-2
Problem
Cause: There is insufficient disk space or not enough available
memory.
Solution: The installation detects when there is insufficient disk
space. Once sufficient disk space is available, continue the
installation. For disk space and physical RAM requirements,
section 4.1
Cause: There is insufficient disk space or not enough available
memory.
Solution: The installation detects when there is insufficient disk
space. Once sufficient disk space is available, continue the
installation. For disk space and physical RAM requirements,
section 4.1
SANsurfer FC HBA Manager GUI/Remote Agent
Cause: The desktop shortcut has an invalid path or SANsurfer
FC HBA Manager was not completely installed.
Solution: Verify that the desktop shortcut points to the
SANsurfer.exe file. This program is installed by default in the
C:\Program Files\QLogic Corporation\SANsurfer directory for
Windows 2000/Windows Server 2003 and NetWare (GUI only).
Cause: There is insufficient memory.
Solution: For physical RAM requirements,
the readme.txt file.
Cause and Solution
or the readme.txt file.
or the readme.txt file.
Q
see
see
see section 4.1 or
FS0054603-00 C