Install Complete Dialog Box - Qlogic SANsurfer FC HBA Manager Application User Manual

Q
A list of the autodetected Windows 2000/Windows Server 2003 drives mapped
to NetWare server system volumes (sys:\) displays.
Perform the following steps to select the Windows 2000/Windows Server 2003
drives on which to install the NetWare agent. Each drive must be mapped to a
NetWare server system volume (sys:\).
a. As appropriate, select one or more autodetected drives. In
b. If a Windows 2000/Windows Server 2003 drive that you want to select has
c. Click Next.
11. The Install Complete dialog box displays
12. Customize the SANsurfer FC HBA Manager and set your security parameters
(see section
FS0054603-00 C
example, H, N, and Q can be selected; N and Q are selected.
not been mapped to the NetWare server system volume, do the following:
Leave the Novell NetWare Disk Selection dialog box open. From the
❑
Exploring window, point to Tools and select Map Network Drive to map
the Windows 2000/Windows Server 2003 drive to the NetWare Server
system volume (sys:\).
From the Novell NetWare Disk Selection dialog box, type the drive letter
❑
in the Enter Drive Letter box and then click Enter Drive Letter. In
figure 5-10, for example, you could type C in the Enter Drive Letter box
and then click Enter Drive Letter.
Figure 5-11. Install Complete Dialog Box
6).
5 – Installing SANsurfer FC HBA Manager
(see figure 5-11). Click Done.
Initial Installation
figure 5-10, for
5-13