Finish Dialog Box - Qlogic SANsurfer FC HBA Manager Application User Manual

7 – Setting Up Connections
Configuring LUN Masking Using the LUN Masking Wizard
Do the following:
a. Read the information about the changes and the process.
b. Do one of the following:
6. If you clicked Next, the device configuration status message asks whether you
want to configure another device. Click OK to configure another device and
return to the Device Selection dialog box (see
to the Finish dialog box.
7. If you clicked Cancel, the Finish dialog box displays
Do one of the following:
❑
❑
❑
❑
7-26
Click Back to return to the previous dialog box.
❑
Click Next to proceed.
❑
Click Cancel to exit the LUN Masking Wizard without making any
❑
changes.
Click Help to display context-sensitive help.
❑
Figure 7-14. Finish Dialog Box
Click Back to return to the previous dialog box.
Click Finish to exit the wizard. The changes become effective when the
machine is rebooted. You can reboot the machine now or later.
Click Cancel to exit the LUN Masking Wizard without making any changes.
Click Help to display context-sensitive help.
step 1). Click Cancel to proceed
(see figure 7-14).
FS0054603-00 C
Q