Setting The Alarm Log Option; Options Dialog Box—Alarm Log Section - Qlogic SANsurfer FC HBA Manager Application User Manual

Q
6.10

Setting the Alarm Log Option

Perform the following steps to set the number of alarms the alarm log can list.
NOTE:
1. Do one of the following:
❑
❑
❑
The Options dialog box displays
Figure 6-10. Options Dialog Box—Alarm Log Section
2. In the Alarm Log section Log Size box, type the number of alarms the alarm
log can list. The range is 20 to 200 alarms. The default is 200 alarms.
3. Click OK to return to the SANsurfer FC HBA Manager main window.
FS0054603-00 C
See section 8.2 for information about viewing the alarm log.
On the SANsurfer FC HBA Manager main window Settings menu, select
Options.
Right-click the HBA tree. From the pop-up menu, click Options.
Press CTRL+SHIFT+O.
Setting the Alarm Log Option
(see figure 6-10).
6 – Getting Started
6-15