Refreshing The Configuration - Qlogic SANsurfer FC HBA Manager Application User Manual

Q
4. In the Group: Binding section, select one of the following to specify whether the
driver binds the target ID using the target's world wide port name (WWPN) or
port ID:
❑
❑
6.13

Refreshing the Configuration

The configuration that the SANsurfer FC HBA Manager GUI displays (including
QLogic main window HBA tree) refreshes automatically based on the polling interval
(see section
the configuration, for example), do one of the following:
Click the Refresh button on the toolbar.
■
On the SANsurfer FC HBA Manager main window Host menu, select Refresh.
■
Right-click the HBA tree. From the pop-up menu, click Refresh.
■
Press F5.
■
FS0054603-00 C
If you want the driver to bind the target ID using the target's WWPN, select
the Bind by World Wide Port Name radio button.
If you want the driver to bind the target using the target's port ID, select the
Bind by Port ID radio button. LUN masking is disabled. If the target port ID
changes, this target will be considered a newly added target: all existing
persistent data will be deleted and specific features disabled.
6.8). If you want to refresh the configuration immediately (you changed
6 – Getting Started
Refreshing the Configuration
6-19