Q
7.9
Deleting Persistent Configuration Data
When you select persistent configuration data, the current configuration data
displays if one exists. You can do the following:
Delete the persistent configuration data for an HBA port and its devices and
■
LUNs
Delete the persistent configuration data for a device and its LUNs
■
section
7.9.1
Deleting HBA Port Persistent Configuration Data
NOTE:
Perform the following steps to delete the persistent configuration data for an HBA
port and its devices and LUNs:
1. Do one of the following:
❑
❑
The Fibre Persistent Configuration Editor displays the HBA ports
figure
Figure 7-21. Fibre Persistent Configuration Editor for HBA Ports
For each HBA connected to the host, the Fibre Persistent Configuration
Editor lists the HBA port number and the HBA world wide port name.
FS0054603-00 C
(see section
7.9.1).
7.9.2).
This option is not available on Solaris SPARC.
From the SANsurfer FC HBA Manager main window HBA tree, right-click
the HBA port (or its host or HBA). From the pop-up menu, select HBA Port
Persistent Configuration Data.
From the Fibre Channel Port Configuration dialog box HBA menu, select
Persistent Configuration Data.
7-21).
7 – Setting Up Connections
Deleting Persistent Configuration Data
(see
(see
7-43
Need help?
Do you have a question about the SANsurfer FC HBA Manager Application and is the answer not in the manual?