Q
This section discusses:
Viewing the alarm log
■
Clearing the alarm log
■
Exporting the alarm log
■
Printing the alarm log
■
Viewing an alarm log received by email
■
NOTE:
8.2.1
Viewing the Alarm Log
Perform the following steps from the SANsurfer FC HBA Manager main window to
view the Alarm Log dialog box:
1. To view the alarms for one host, do one of the following:
❑
❑
❑
❑
To view the alarms on one HBA, do one of the following:
❑
❑
❑
To view the alarms on one HBA port, do one of the following:
❑
❑
❑
FS0054603-00 C
(see section 8.2.1)
(see section 8.2.2)
(see section 8.2.3)
(see section 8.2.4)
See section 6.10
for information about setting the alarm log options.
Select the host in the HBA tree. From the View menu, select Alarm Log.
Right-click the host in the HBA tree. From the pop-up menu, select Alarm
Log.
Select the host in the HBA tree. Click Alarms on the toolbar.
Select the host in the HBA tree. Press CTRL+SHIFT+A.
Select the HBA in the HBA tree. From the View menu, select Alarm Log.
Right-click the HBA in the HBA tree. From the pop-up menu, select Alarm
Log.
Select the HBA in the HBA tree. Press CTRL+SHIFT+A.
Select the HBA port (or a device or LUN connected to the HBA port) in the
HBA tree. From the View menu, select Alarm Log.
Right-click the HBA port (or a device or LUN connected to the HBA port) in
the HBA tree. From the pop-up menu, select Alarm Log.
Select the HBA port (or a device or LUN connected to the HBA port) in the
HBA tree. Press CTRL+SHIFT+A.
8 – Monitoring the Connections
Viewing and Managing the Alarm Log
(see section 8.2.5)
8-7