Setting Up Automatic Alarm Notification By Email; Email Settings Dialog Box - Qlogic SANsurfer FC HBA Manager Application User Manual

6 – Getting Started

Setting Up Automatic Alarm Notification by Email

6.11
Setting Up Automatic Alarm Notification by Email
You can automatically send alarm notifications with a copy of the current host
configuration by email to a distribution list, thus enabling the information to be
opened and analyzed from other locations. Alarm notification is available only with
SMTP email servers.
NOTE:
Perform the following steps to set up automatic alarm notification by email:
1. Do one of the following:
❑
❑
The Email Settings dialog box displays
2. In the Server section, do the following:
a. In the Server box, type the host name or an IP address of the SMTP server
b. In the Login box, type the login information.
c. In the Password box, type the password.
3. In the Email Addresses box, enter one or more email addresses to be notified.
List one email address for each line.
6-16
For information about viewing alarm notifications received by email,
section 8.2.5.
On the SANsurfer FC HBA Manager main window Settings menu, select
Email.
Press CTRL+SHIFT+M.
Figure 6-11. Email Settings Dialog Box
accessible on the local network.
(see figure 6-11).
FS0054603-00 C
Q
see