Starting Sansurfer Fc Hba Manager On Windows 2000/Windows; Server 2003; Starting Sansurfer On Red Hat/Suse Linux Or Solaris Sparc; Sansurfer Icon - Qlogic SANsurfer FC HBA Manager Application User Manual

6 – Getting Started
Starting the SANsurfer FC HBA Manager GUI
6.1.1
Starting SANsurfer FC HBA Manager on Windows 2000/
Windows Server 2003
On a Windows 2000/Windows Server 2003 system, do one of the following to start
the SANsurfer FC HBA Manager. When done, the SANsurfer FC HBA Manager
GUI displays
Double-click the SANsurfer icon on your desktop (if the icon was created during
■
installation)
Manager and are upgrading to the current version, the old icon image displays.)
Click the Start button, point to Programs, point to QLogic Management Suite,
■
and then click SANsurfer.
Click the Start button, click Run, and then do one of the following:
■
Type in the name of SANsurfer (SANsurfer.EXE), including all the paths. Click
❑
OK.
Click Browse, then select the program after finding it in the Browse dialog
❑
box. Click Open.
6.1.2

Starting SANsurfer on Red Hat/SuSE Linux or Solaris SPARC

On Red Hat/SuSE Linux and Solaris SPARC systems, perform the following steps
to start the SANsurfer FC HBA Manager. When done, the SANsurfer FC HBA
Manager GUI displays
1. Ensure that you are in a graphical user environment.
2. Open a command terminal.
3. Type SANsurfer and then press ENTER.
6-2
(see section 6.2).
(see figure 6-1). (If you have an older version of SANsurfer FC HBA
Figure 6-1. SANsurfer Icon
(see section 6.2).
Q
FS0054603-00 C